i-Cooler Controller

Client

SLIGHTGEN

Product Description

i-Cooler controller converts the manual cooler into remote controlled cooler with multiple features. The standard cooler has a know that used to ON/OFF cooler and to set the fan speed. Installing this device into the cooler gives the functionality like an AC. This device can be installed into any standard cooler available in the market with very easy connections.

The cooler controller comes with dry run protection features that turn OFF the water motor once the water gets drain. It protects the water motor from burning due to dry run and increases the motor life.

Another features is i-mode which maintain the humidity of room by turning ON/OFF the water motor periodically. This feature saves the water and electricity. Sometimes due to continuously run of water motor the rooms gets humid so this mode helps to reduce the humidity problem.

The cooler controller comes with sleep timer features that will turn off the cooler after the predefined set time. This will prevent the room to get over cooled due to continuos running of the cooler. This saves the electricity and water as well.

Along with all these features the i-cooler controller can set the fan speed and turn ON/OFF the cooler. All these functions can be set by the wireless remote and all the parameter like i-mode ON time, OFF time, Sleep Time can be set as per user need.

The cooler controller comes with three variant.

Rolling Display Model
Single Display Model
Single Display with Knob model

Product Features

Remote Control
- Turn your cooler/water pump ON/OFF remotely from any corner of the room just at your finger tips.
Fan Speed Control
- No need to get up to control fan speed of your cooler. With three speed (Low/Medium/High) options on the remote, speed up or down your cooler fan remotely.
Dry Run Protection
- With this feature, you need not worry about your pump running even when cooler runs out of water. iCooler Controller senses pump’s dry run and turns the pump off immediately saving power and pump burning.
Alpha Numeric display and LED indicators
- Get visual information about speed level, timer status, low water level indication, etc
Sleep Timer
- Set your device on timer and you need not worry about turning it off. Once the time is up, cooler will turn off itself.
i-mode
- This mode saves water and electricity by consuming less of both and also helps to maintain the humidity of the room. This has become possible with our intelligent PUMP-ON principle. Pump turns on only for the period that sides need to wet and then turns off.
Universal compatibility
- It is compatible with all cooler models.

Working

The cooler controller has a remote which runs on a infrared technology. The cooler controller has an IR receiver which decodes the data sent by the remote. A micontroller is used to decode the IR data, control the 7-segment LED display, control the relay for fan speed ,control the water motor and sense the water level. A water level sensor is dipped into the water tank of cooler. once the water level goes below to the sensor limit it will turn oFF the water motor and shows the Low water indications.

The installation of device is very simple. Below is the wiring diagram to connect the device with the standard cooler.